Chartered Engineering

Importing second-hand capital goods into India: a plain-language guide to FTP Para 2.31

What India’s Foreign Trade Policy 2023 says about importing used machinery: which categories are free or restricted, and where a Chartered Engineer comes in.

By Techkrate Editorial TeamUpdated 4 min read

Key takeaways

  • Para 2.31 of the Foreign Trade Policy 2023 is the master provision for second-hand imports. Schedule 1 of ITC (HS) applies to new goods.
  • Second-hand capital goods not covered by a specific restriction are freely importable under category I(d), with no age condition stated in the current DGFT text.
  • Refurbished or reconditioned spares of capital goods are free, subject to a Chartered Engineer certificate confirming at least 80% residual life.
  • Second-hand goods that are not capital goods, and certain listed categories such as some used electronics, remain restricted.

Used machinery is a practical way for Indian manufacturers to add capacity at lower cost. Importing it, though, involves policy checks, inspection and valuation that new equipment does not. The starting point for every second-hand import is Para 2.31 of the Foreign Trade Policy 2023.

This guide explains that provision in plain language. It reflects the DGFT text available in November 2026. Policies change by notification, so always check the current text on the DGFT website and take professional advice for each consignment. This article is not legal or customs advice.

Why second-hand goods have their own rules

Under Para 2.02(d) of FTP 2023, Schedule 1 of the ITC (HS) import policy applies to new goods unless clearly stated otherwise. Second-hand goods follow a separate regime set out in Para 2.31. That means you cannot rely on the import policy for a new version of the same item. You need to check Para 2.31.

The categories in Para 2.31

The DGFT text organises second-hand goods into broad categories. The summary below follows that structure.

Category Policy Conditions
I(a) Certain used items such as desktops, refurbished laptop and PC parts, air conditioners and diesel generating sets Restricted Importable against an authorisation
I(b) Electronics and IT goods notified under the 2021 Compulsory Registration Order Restricted Subject to the Order’s conditions. Unregistered or non-compliant notified products are prohibited
I(c) Refurbished or reconditioned spares of capital goods Free Chartered Engineer certificate confirming at least 80% residual life of the original spare
I(d) All other second-hand capital goods Free None stated
I(e) Used IT assets moved from SEZ units to the domestic tariff area Restricted, treated as free under conditions Conditions on age and period of use
II Second-hand goods other than capital goods Restricted Importable against an authorisation
III Second-hand goods imported for repair, refurbishing, reconditioning or re-engineering Free Re-export and waste handling conditions apply

What “capital goods” means here

The free category I(d) applies only to capital goods. FTP definitions treat capital goods broadly, covering plant, machinery and equipment used in manufacturing or in providing services, along with related items. Whether a particular item counts as a capital good can be contested, and courts have examined that question in several disputes. When in doubt, take advice before shipping.

Where age limits went

Older versions of India’s trade policy allowed free import of second-hand capital goods subject to an age limit. Many importers still assume that rule applies. The current DGFT text for category I(d) lists no age condition. The five-year limit in the current text applies specifically to used IT assets moving from SEZs under category I(e). Restrictions on specific items in categories I(a) and I(b) apply regardless of age.

Where Chartered Engineers come in

Chartered Engineers appear at two points in a typical used machinery import.

Policy compliance for refurbished spares. Category I(c) requires a Chartered Engineer certificate confirming at least 80% residual life. Our article on residual life certificates covers what such a certificate should document.

Valuation for Customs. Customs values imported goods. For second-hand machinery, CBIC Circular 07/2020-Customs sets out how Custom Houses use inspection and appraisal reports from qualified Chartered Engineers, and directs them to empanel engineers for the purpose. See our explainer on CBIC Circular 07/2020.

Other laws still apply

Para 2.31 deals with import policy under the Foreign Trade Policy. Other requirements may apply depending on the goods, including environmental rules, product safety and standards orders, and sector-specific approvals. Para 2.03 of FTP 2023 makes clear that imports must comply with domestic laws. Our article on restricted second-hand goods importers often miss looks at some of these.

A practical checklist for importers

  1. Confirm the goods are second-hand capital goods, and which Para 2.31 category applies.
  2. Check whether any restriction, registration order or other domestic law covers the item.
  3. Arrange for inspection and valuation by an appropriately qualified Chartered Engineer.
  4. Keep invoices, packing lists, bills of lading and technical documents consistent with what will be physically found.
  5. Allow time for inspection and reporting in your shipping plan to avoid port charges.

How Techkrate fits in

Techkrate builds CARS, a workflow platform for Chartered Engineering practices. It helps engineers organise inspection evidence, documents and valuation workings for each consignment and generate reports in their own format. CARS does not certify goods or decide policy questions. Those remain with the engineer, the importer and the authorities. Learn more on the CARS page or our machinery import industry page.

Frequently asked questions

Is there an age limit for importing used machinery into India?

Earlier policies included age limits for second-hand capital goods. The current DGFT text of Para 2.31 of FTP 2023 lists other second-hand capital goods as free without stating an age condition. Specific categories remain restricted, so check the current text and take professional advice for your goods.

Do I need a Chartered Engineer certificate to import used machinery?

For refurbished or reconditioned spares of capital goods, FTP 2023 requires a Chartered Engineer certificate confirming at least 80% residual life. For valuation of second-hand machinery, Customs relies on inspection and appraisal reports by Chartered Engineers under CBIC Circular 07/2020. Requirements depend on the goods and the port.

Has Para 2.31 changed recently?

The most recent changes we found were in 2024: DGFT linked category I(b) to the Electronics and IT Goods Compulsory Registration Order and added category I(e) for used IT assets moving from SEZs into the domestic tariff area. Policy changes by notification, so check the DGFT notifications page before each import.

Are second-hand goods imported for repair treated differently?

Yes. Category III of Para 2.31 covers second-hand goods imported for repair, refurbishing, reconditioning or re-engineering, with its own conditions, including re-export and waste-handling requirements.

Regulatory references were checked at the time of writing. Rules change, so confirm against the current official text before relying on them. This article is general information, not legal advice.

See where Techkrate fits your practice.

Leave your work email and we will set up a walkthrough of MOVAL or CARS using work like yours.

We use your email only to arrange the walkthrough. See our Privacy Policy.