A practical inspection checklist for used machinery at the port
A field checklist for Chartered Engineers and their staff inspecting imported second-hand machinery, from preparation to evidence capture and reconciliation.

Key takeaways
- Port inspections are time-limited, so preparation before the visit determines quality on the day.
- Every observation should be tied to a specific item and supported by a photograph.
- Reconciling physical findings with the invoice, packing list and bill of lading catches problems before they reach the report.
- A standard capture sequence lets site staff gather consistent evidence for the engineer to review.
Inspecting used machinery at a port or container freight station is rarely leisurely. Containers are opened for a limited window, lighting is often poor, and the importer is watching the clock on demurrage. Under those conditions, a good checklist is the difference between a complete record and a repeat visit.
This checklist is a practical starting point for Chartered Engineering practices. Adapt it to your own professional standards and to the requirements of each Custom House.
Before the visit
- Collect documents in advance. Commercial invoice, packing list, bill of lading, technical literature and any refurbishment records.
- Build an item list. Turn the packing list into a list of items to inspect, each with an identifier.
- Check policy questions early. Confirm with the importer how the goods are classified and whether any category under FTP Para 2.31 or other domestic law raises a concern. See our guide to Para 2.31.
- Brief the site team. Share the item list, the capture sequence below and any specific points the engineer wants checked.
- Prepare equipment. Charged devices, a torch, a measuring tape, gauges if needed, and a way to label items in photos.
On site: identification
For each item:
- Photograph the item in full, from at least two angles.
- Photograph the nameplate clearly, with make, model, serial number and year of manufacture readable.
- If there is no nameplate, photograph other identification marks and record their location.
- Note any discrepancy between what is found and what the documents describe.
On site: condition
- Photograph general condition, including rust, damage, missing parts and signs of recent refurbishment.
- Photograph critical components relevant to the machine’s function and value.
- Record observations in plain language, linked to the item.
- Take measurements where they matter for the assessment.
- Note anything that could not be inspected, and why.
On site: completeness
- Check off each item on the list as it is inspected.
- Photograph accessories, tooling and spares included in the consignment.
- Before leaving, confirm that every item has identification and condition photos.
After the visit: reconciliation
- Quantities: do the items found match the packing list?
- Descriptions: do makes, models and specifications match the invoice?
- Age: does the year of manufacture on the nameplate match the documents?
- Condition: is the observed condition consistent with any refurbishment claims?
Any mismatch should be recorded and raised with the engineer before the report is drafted.
Common pitfalls
Photos without context. A close-up of a nameplate is useless if nobody knows which machine it came from. Capture a wide shot showing the nameplate’s location first.
Evidence scattered across phones. Photos shared later through chat apps lose their order and context. Capture them into a structured record during the inspection where possible.
Notes written from memory. Observations recorded hours later are less reliable. Record them at the item.
Safety on site
Ports and container freight stations are working industrial sites. Inspection teams should follow site rules and their own safety procedures at all times.
- Wear the protective equipment the site requires, typically safety footwear, high-visibility clothing and a helmet.
- Do not enter containers until doors are secured and the load has been checked for movement.
- Do not operate machinery or energise equipment unless it is safe, authorised and within the scope of the inspection.
- Be cautious around sharp edges, residual oils and heavy components that may have shifted in transit.
- Work in pairs where possible and keep the site supervisor informed of where the team is.
Safety and evidence quality are linked. A rushed, unsafe inspection usually produces poor photos and incomplete notes as well. Allowing realistic time on site, agreed with the importer in advance, supports both.
After the report is issued
Keep the full inspection record, including photos, notes, reconciliations and the final report, organised by consignment and item. Questions can arise long after clearance, and a complete, well-organised record makes them quick to answer. Retention periods should follow the practice’s professional obligations and legal advice.
Making the checklist part of the workflow
A checklist on paper helps. A checklist built into the capture tool helps more, because the record itself shows what is missing before the team leaves the site.
CARS, Techkrate’s platform for Chartered Engineering practices, lets site staff capture photos, nameplate details and notes against each item in a consignment, so the office can see progress and gaps in real time. The engineer then reviews a complete record before forming an opinion. See how it works on the CARS page.
Frequently asked questions
Who should carry out the physical inspection?
Requirements depend on the purpose and the Custom House. Many practices send trained staff to capture evidence under the engineer’s direction, with the engineer examining the goods where required and always reviewing the evidence before forming an opinion. Check the applicable public notice and professional obligations.
What is the most commonly missed evidence?
Clear photographs of nameplates and identification marks, and evidence linking each photo to a specific item in multi-item consignments, are the most frequent gaps.
What documents should be reviewed before the visit?
The commercial invoice, packing list, bill of lading and any earlier inspection reports, so the team knows what to expect item by item.
How should items be identified on site?
By nameplate data such as make, model, serial number and year of manufacture, photographed and matched to the packing list before condition is recorded.
Regulatory references were checked at the time of writing. Rules change, so confirm against the current official text before relying on them. This article is general information, not legal advice.


